Cross Point Gear Pro Wool Gloves and Mountain Socks Review
Active Gear Review is supported by its audience. If you purchase through links on our site, we may earn an affiliate commission.
Waterproof gloves and socks that feel like knit gloves? I was skeptical. I had to try them for myself. Cross Point Gear specializes in waterproof hats, gloves, and socks that are also breathable. That combination immediately caught my attention.
With more than 25 years of experience in outdoor gear, Cross Point Gear has built a reputation around waterproof accessories. The company uses innovative, multi layer fabrics that block outside moisture while still allowing heat and sweat to escape. As a result, their products are designed to keep you dry from both rain and perspiration. In theory, that means no more clammy hands or soaked socks after a long day outside.
Most of my time outdoors is spent hunting and fishing. Those long hours often mean cold water, wet brush, and steady wind. Inevitably, my hands end up cold and damp. Because of that, the idea of knit feeling gloves that are fully waterproof felt almost too good to be true. If they perform as promised, they could be a true game changer for my time in the field.
About Cross Point Gear
Cross Point Gear has built its reputation on gear that is both waterproof and breathable. At the center of that performance is its Artex3D fabric. This is where the waterproofing advantage begins. Traditional waterproof products often rely on seams, and seams create weak points where leaks can form. Cross Point Gear takes a different approach.
Instead of stitched construction, the company uses a 3D molding process that shapes the Artex3D membrane to the exact form of the product. The result is a seamless, one piece barrier. Because there are no seams, there are fewer opportunities for water to get in. At the same time, Artex3D remains breathable. Unlike materials such as neoprene, it allows heat and moisture vapor to escape. That breathability helps prevent the clammy, sweaty feeling that so many waterproof accessories create.
The Waterproof Pro Wool Gloves
The Waterproof Pro Wool Gloves are designed for cold and wet conditions. They rely on Artex3D technology to keep water out while still allowing your hands to breathe. As a result, they aim to deliver warmth without that sealed in feeling.
Inside the glove, a soft merino wool layer sits next to your skin. Merino is known for comfort, but it also excels at moisture management. It wicks sweat away and helps regulate temperature during long days outside. On the exterior, a durable knit shell adds structure and wear resistance. This outer layer is built to handle brush, gear, and repeated use.
Grip is enhanced with silicone prints across the palm and fingers. That added traction is especially helpful in wet weather when handling fishing rods, firearms, or tools. The gloves also feature antimicrobial properties to help control odor after extended use.
Grip
The Mountain Socks
The Mountain Socks follow a similar three layer construction. Once again, the Artex3D membrane provides the waterproof and breathable barrier. This consistency across products shows a clear design philosophy.
Inside the sock, a merino blend liner combines merino, acrylic, polyester, and nylon. This blend balances comfort, durability, and moisture control. Underfoot, a full terry loop footbed adds cushioning and insulation. That extra padding is noticeable during long hikes or extended hours standing in cold water.
Gearing Up For Ice Fishing
The sock rises about 9.5 inches up the calf, offering solid coverage and protection. Like the gloves, it also includes antimicrobial and moisture wicking properties. Altogether, the Mountain Sock is built to keep feet dry, warm, and comfortable in demanding conditions.
Thoughts on the Cross Point Gear Pro Wool Gloves and Mountain Socks
As someone whose hands are constantly wet and cold during ice fishing and late season hunting, I have almost given up on waterproof gear. In my experience, waterproof usually means bulky or non breathable. For me, those downsides can feel worse than simply dealing with cold, wet hands and feet. Because of that, the idea of knit gloves and socks that are both waterproof and breathable was genuinely exciting. Over the past few weeks here in Colorado, ice fishing conditions have been ideal for testing them.
Ice fishing is a constant battle against slush and water. Even with insulated boots, water seems to find a way in, especially when drilling holes or moving between spots. That is where the Mountain Socks have stood out. They have consistently kept my feet dry, even when my boots took on water. Normally, once your feet get wet, the clock starts ticking. Comfort drops fast, and the day gets cut short. With these socks, that pressure simply was not there. Even in fair weather, dry feet make a noticeable difference in how long you can stay on the ice.
Slush Fest
Beyond ice fishing, I see real potential for the Mountain Socks during elk season. Stream crossings, slushy snow days, and high country bogs are all part of the hunt. In each of those situations, wet feet are common. Since the socks only weigh a few ounces, packing them is an easy decision. They will live in my hunting pack from now on. Even my lighter day hunt setups will include them.
Warm Hands
The Pro Wool Gloves have delivered similar results. During fringe season fishing, my hands are almost always wet. I am clearing ice from reels, kneeling in slush, and unhooking fish with freezing water dripping everywhere. Normally, I avoid gloves because they feel restrictive or get soaked quickly. However, these lightweight gloves have changed that routine. They keep water out while still allowing my hands to move naturally. On days when temperatures stay below twenty degrees, that added protection has made a huge difference. Ice fishing has simply become more comfortable.
Digging Out a Trout
Like the Mountain Socks, the Pro Wool Gloves will be coming along on future trips. We have a trip planned to Norway this summer, and the cool, damp coastal climate seems like a perfect match for them. I also think back to a fishing trip in Alaska last year. Even at fifty degrees, constant rain and spray made everything feel cold. Gear like this would have made those long, wet days far more enjoyable.
Mountain Socks Specs Taken From Cross Point
- Artex3D waterproof and breathable membrane
- Seamless 3D molded waterproof construction
- Three layer design
- Merino blend inner liner with merino, acrylic, polyester, and nylon
- Full terry loop cushioned footbed
- Moisture wicking performance
- Antimicrobial odor control
- Approximately 9.5 inch crew height
- Lightweight design at only a few ounces per pair
- Built for cold, wet conditions
Pro Wool Gloves Specs taken From Cross Point
- Artex3D waterproof and breathable membrane
- Seamless 3D molded construction
- Three layer design
- Soft merino wool interior lining
- Durable knit exterior shell
- Silicone palm and finger grip pattern
- Moisture wicking performance
- Antimicrobial odor resistance
- Lightweight and flexible fit
- Designed for cold and wet outdoor use
Final Thoughts on the Cross Point Gear Pro Wool Gloves and Mountain Socks
After several weeks of use, both the Mountain Socks and the Pro Wool Gloves proved that waterproof does not have to mean bulky or suffocating. Unlike many waterproof options, these pieces remain comfortable during active days and do not trap sweat.
The Mountain Socks stand out for their ability to keep feet dry even when boots get wet. That alone can extend a day on the ice or in the field. Because they are lightweight and easy to pack, they make sense for both long hunts and quick outings.
The Pro Wool Gloves offer similar performance for your hands. They provide reliable waterproof protection while still maintaining dexterity. Instead of constantly removing gloves to work with gear, I was able to leave them on and stay comfortable. For more info or to try out a set for yourself, visit crosspointgear.com, rei.com or amazon.com.
